ACK Straight Rod Melt Pressure Sensor ACK-RT-02_Shanghai MX-CEKONG Technology Co.,Ltd

Your position: HOME > Product > Melt Pressure Transmitter (RT) >

Product

Melt Pressure Transmitter (RT)

Wireless series

Tel： 400 662 6286

ACK Straight Rod Melt Pressure Sensor ACK-RT-02

ACK-RT-02,which can completely replace the similar imported products from the United States and Italy.The shell of pure stainless steel is coupled with circuit with strong anti-interference ability, and the straight insert thread connection of steel rod is made of special material and alloy elastic diaphragm, which reduces the temperature drift and improves the measurement accuracy.A thermocouple is installed to measure the pressure and temperature at the same point.Not only can amplify the signal directly into the PLC control system, but also can MV signal into the secondary instrument of our company, to achieve simple automatic control.Internal 80% calibration signal, simple installation, high cost performance.

Online service

Tel：

400 662 6286

1.Overview:

2.Applications:

1. Chemical fiber drawing
2. Medicine, food processing and packaging
3. Plate extruder and profile extruder
4. Granulation recycling machine, etc
5.Measurement and control of other high temperature fluid pressure
6. Plastic and rubber manufacturing equipment

3.Feathers:

1. 80% internal calibration signal
2. Good stability and repeatability
3. 15-5 PH diaphragm material
4. Maximum temperature resistant at 450 ℃
5. Can replace the same products imported from the United States
6. High precision and stability
7. We also own the economical products on the basis of imported ones
8. Vibration and shock resistance, wide measuring range

4.Dimensions:

Mono-function type

Tem-Pressure dual-function type

5.Mainly technical parameters:

Model selection：	ACK-RT-02（mono-function）；ACK-RT-02T（measuring both temperature and pressure）
Pressure range：	0-2MPA（please select the great thread for this range）；0-20MPA 0-50MPA 0-100MPA 0-150MPA （the range can be discussed）
Comprehensive precision：	0.25%FS；0.5%FS
Overload pressure：	1.5 times of the rated pressure
Output signal：	Sensor signal：3.33MV/V ；transmitter output signal 4-20mA； 0-10V；0-5V； 4-20mA+HART；RS485
Output signal：
Burst pressure：	3times of the rated pressure
Supply voltage：	Transmitter 24VDC（12-36V）；sensor10VDC（9~12V）
Operation temperature：	-20℃~450℃
Compensation temperature：	0℃~300℃
Nonlinear value：	0.2% of the full range
Diaphragm：	15-5PH stainless steel with coating ；special diaphragm material（please communicate with the type-selection engineer ）
Internal calibration	80%FS±1%
Length of the rod：	length of the hard rod：S：6″（inch）（152mm），9″（230mm），12″（305mm）
	length of the flexible rod ：N：18″（460mm）；30″（762mm）；1inch=25.5MM

Pressure connection：	1/2″-20UNF, M14×1.5, M18×1.5, M22×1.5,G3/4（according to customers’ requirements）
Electrical connection：	six-core aviation plug-in；gland outlet
Graduation selection	PT100,J,K ,E
Enclosure material：	default stainless steel enclosure /insulation impedance：200MΩ @ 100 Vdc

6.Ordering guidance:

Type	Range(bar)	Accuracy	Output signal	Length of the rod	Screw-installation	Electrical connection	Graduation number
ACK-RT-02T	50MPA	0.5%S	4-20MA	6=152MM	M14*1.5	six-core plug-in	PT100
E g	ACK-RT-02T-50MPA-B2-6-M14-C-P