ACK Flexible Rod Melt Pressure Sensor ACK-RT-04_Shanghai MX-CEKONG Technology Co.,Ltd

Your position: HOME > Product > Melt Pressure Transmitter (RT) >

Product

Melt Pressure Transmitter (RT)

Wireless series

Tel： 400 662 6286

ACK Flexible Rod Melt Pressure Sensor ACK-RT-04

ACK-RT-04 series high precision and high temperature melt pressure sensor/transmitter is a product developed by our company to replace the similar imported Products from The United States and Italy, aiming at the current dilemma of high-end plastics and chemical fiber industry where the Products from the United States and Italy are always used.Pure stainless steel shell and anti-interference ability of the circuit, and on the basis of the rigid rod with a flexible rod remote transmission function, make it in the field of high temperature under the harsh environment more good installation environment, now occupies a large share in the market.

Online service

Tel：

400 662 6286

1.Product description:

2. Applying field:

1. Chemical fiber wire drawing
2. Medicine, food processing and packaging
3. Sheet extrusion machine, profile extrusion machine
4. Granulation recycling machine, etc
5. Other high temperature fluid pressure measurement and control
6. Plastic and rubber manufacturing

3.Product features:

1. 80% internal calibration signal
2. Good stability and repeatability
3. 15-5 PH diaphragm material
4. Highest temperature resistant of 350 ℃
5. Can replace the same products imported from the United States
6. High precision and stability
7. We also supply economical products on the basis of imported ones

4.Dimensions:

Mono-function type

Tem-Pressure dual-function type

5.Technique specifications:

Mode selection：	ACK-RT-04（mono-function）；ACK-RT-04T（ both tem and pressure measurement）
Pressure range：	0-2MPA（great thread for this range）；0-20MPA 0-50MPA 0-100MPA 0-150MPA （range can be discussed）
Comprehensive precision：	0.25%FS；0.5%FS
Overload pressure：	1.5 times of the rated pressure
Output signal：	Sensor signal：3.33MV/V；Transmitter output signal4-20mA； 0-10V；0-5V； 4-20mA+HART；RS485.
Output signal：
Burst pressure：	3times of the rated pressure
Power supply：	transmitter24VDC（12-36V）；sensor10VDC（9~12V）
Working temperature：	-20℃~400℃
Compensation temperature：	0℃~300℃
Nonlinear values：	0.2% of the full range
Diaphragm materials：	15-5PH stainless steel with coating ；special diaphragm material（please communicate with the engineer）
Internal calibration	80%FS±1%
Length：	length of the hard rod：S：6″（inch）（152mm），9″（230mm），12″（305mm）
	length of the flexible tube：N：18″（460mm）；30″（762mm）；1 inch=25.5MM

Pressure connection：	1/2″-20UNF, M14×1.5, M18×1.5, M22×1.5,G3/4（as the customers’ requirements）
Electrical connection：	six-core aviation plug-in；gland outlet
Graduation selection	PT100，J，K，E，
Shell material：	defaulted stainless steel shell /insulation impedance：200MΩ @ 100 Vdc

6.Parameters:

7.Ordering guide:

Type	Range(bar)		Precision	Output	Rod length/Flexible tube	Screw	Electrical connection	Graduation number
ACK-RT-04T	50MPA		0.5%S	4-20MA	6=152MM/460MM	M14*1.5	6-core plug-in	PT100
E g		ACK-RT-04T-50MPA-B2-6/18-M14-C-P