Single Crystal Silicon Sanitary Dual Clamp Differential Pressure Transmitter :MX-YL-188-06

Your position: HOME > Product > Smart Monocrystalline Silicon >

Product

Melt Pressure Transmitter (RT)

Wireless series

Tel： 400 662 6286

Single Crystal Silicon Sanitary Dual Clamp Differential Pressure Transmitter :MX-YL-188-06

The MXY-YW-188-06 remote pressure/differential pressure/level transmitter is used to measure the pressure, level, or density of a liquid, gas, or vapor.The product can be configured HART communication protocol, can communicate with the control system or manual operator, through which the setting, monitoring, testing and configuration.The HART protocol USES the industry-standard BELL202 frequency phase-shift keying (FSK) technology to communicate with a digital signal superposition over a 4-20mA signal without any interference from the frequency signal.

Online service

Tel：

400 662 6286

1.Overview:

2.Applications and feathers:

1.Applications:
1. Concentrated extraction equipment
2. Linkage line, automatic bottle washing machine
3. CIP/SIP cleaning sterilization equipment, automatic hydraulic system
4. Biological products, chemical industry, environmental energy, the experimental device
5. Vacuum sterilization system, filter, fermentation, extraction system
6. Pharmaceutical, food, dairy, juice drinks, beer, environmental protection
7. Preparation of purified water, water for injection, preparation of pure steam system
2. Main features:
(1) Small in size and light in weight.
(2) Fast response speed and high precision.
(3) Good reliability.
(4) Can be reset directly
(5) Good overload performance
(6) With adjustable damping device

3.Location influence:

The change of installation position parallel to the diaphragm will not cause zero drift. If the change of installation position and film surface is more than 90°, zero drift within 0.5KPa can be corrected by zero adjustment without affecting the range.

4.Load feathers:

Power supply: The power supply is 12 ~ 45VDC or 14.5 ~ 45VDC (add passive isolator, enhance anti-interference), and the general working power supply is 24VDC.

HART digital signal is superimposed on two-wire (4 ~ 20)mA dc signal, and the user selects linear output or square output

5.安装示意图：

Installation diagram:

5.Selection table:

Double flange level transmitter:MX-YL-188-06（with LCD display）

Output

4-20mA with HART Communication

4-20mA output

Range

0-100Pa～1kPa（0-10～100 mmH₂O）/(0-1～10mbar)

0-200Pa～6kPa（0-20～600 mmH₂O）/(0-2～60mbar)

0-400Pa～40kPa（0-40～4000 mmH₂O

the range is directly attach to type-selelction

Material filling liquid　

Stainless steel:316L

Silicon oil

Ti-diaphragm

Silicon oil

HC alloy

Silicon oil

Ta-diaphragm

Silicon oil

Working pressure

1MPA

1.6MPa

25MPa

40MPa

Process connection

Sealing:50.5

Sealing:63.5

Sealing material

（NBR）

(FKM)　

(PTFE)

Other factors

Mounting bracket

Stainless steel

Zinc plated carbon steel

Electrical connection accessories

G/2

External thread 　

1/2 inch NPT Oval flange of stainless steel internal screw

M20x1.5 External screw with stainless st

6.Ordering guidance:

Type	Output	Range	Material	Process connection	Electrical connection	Other requirements
MX-YL-188-06	4-20MA+HART	5M	316L	50.5clamp	1/2NPT	Defaulted precision:0.075%
E g：	MX-YL-188-06-10H-5M-30A-50A-90A