Medium and High Temperature Pressure Transmitter:MX-YL-03

Your position: HOME > Product > Pressure Transmitter >

Product

Melt Pressure Transmitter (RT)

Wireless series

Tel： 400 662 6286

Medium and High Temperature Pressure Transmitter:MX-YL-03

MX-YL-03: Pressure sensor: It is a kind of component that converts physical energy into an visual form, and it is an indispensable core part in the current automation and automatic control industry.Its function is to turn the pressure signal into an electrical signal and send it to the control, analysis and display terminal. The transmitter adds an amplifier circuit on the basis of the sensor to change the electrical signal into a stable amplifier signal and transmit it out. It is widely used in industrial automation, aviation, aerospace and military fields.

Online service

Tel：

400 662 6286

1.Overview:

2.Applications:

1.Fluid and gas in the medium and high temperature field
2.Vapour pressure measurement and control
3.Mechanical Engineering
4.Healthcare, food and beverage processing, petroleum chemical industry
5.Experiment or test equipment\the hydraulic field

3.Features:

1. 0.... 1 bar to zero....1000bar wide pressure range
2. Imported high temperature sensitive elements
3. Cold welding technology and fin unit
4. High precision, off-calibration and all stainless steel structure
5. Special cooling structure design, high temperature resistant
6. Miniature amplifier, voltage and current signal output
7. Strong anti-interference, good long-term stability
8. Diverse structures, easy to install and use
9. Wide measureing range

4.Screw connection：

5.General dimensions:

6.Mainly technical parameters :

Range：	-100KPA-0，0-0.6MPA ，0-10MPA ，0-100MPA 0-200MPA（the range can be discussed）
Comprehensive precision：	0.1%FS(code name:S)；0.25%FS(code name:A)；0.5%FS （code name:B）；
Nonlinear value：	0.2% of the full range
Reliability value：	0.05% of the full range
Output signal：	4-20mA（two-wire code:2）； 0-10V（code:3）；0-5V（three-wire code:4） 4-20mA+HART（code:5）
Output signal：
Supply voltage：	24(12~36)VDC (amplifying signal)
Operation temperature：	-20~180℃
Compensation temperature：	0~65℃
Overload pressure：	1.5times of the rated pressure
Response time：	≤1ms（up to 90%FS）
Body material：	wetted material: 316L，the shell material is made of stainless steel and hard aluminum
Electrical connection：	(code name:D1)Hersman（DIN43650）/enclosure protection:IP65；water-proof gland/enclosure protectionIP68(code name:D2)；Aviation plug-in/enclosure protectionIP45(code name:D3)；
Pressure connection：	G1/4, G1/2, 1/2NPT, 1/4NPT, M12*1.5,etc.（customization）

7.Wiring mode:

Electrical connector

The second wire (4-20mA)

The third wire (0-10V, 0-5V, 0.5-4.5V)

Hersman plug-in

Function

Color

Function

Color

power source+/signal+

red

power source+

red

power source-/signal-

black

signal+

yellow

---

Power supply-/Signal-

black

Direct lead

Function

Color

Function

Color

power source+

red

power source+

red

signal+

black

signal+

yellow

---

power source-/signal-

black

Note：

Select different electrical connections. Please refer to the corresponding wiring methods provided above . If cables are attached, please refer to the colors of each line for wiring. If not, to make wire according to the function of the pin.

8.Ordering guidance:

Type	Range	Accuracy	Output signal	Screw connector	Electrical connection	Other requirements
MX-YL-03	50BAR	0.25	4-20MA	M20*1.5	Hersman	---
E g： MX-YL-03-50Bar-A2-G1/2-D1