Wind Pressure Micro Differential Pressure Transmitter:MX-YL-07

Your position: HOME > Product > Pressure Transmitter >

Product

Melt Pressure Transmitter (RT)

Wireless series

Tel： 400 662 6286

Wind Pressure Micro Differential Pressure Transmitter:MX-YL-07

MX-YL-07 series, reflecting the world's best transmitter technology;Advanced circuit linearity and temperature compensation technology;Compact and sturdy;Small size and light weight;Easy to install;Easy to use.Suitable for all kinds of dry non - corrosive gas pressure or differential pressure measurement, measurement accuracy is high.It is widely used in the measurement of pressure or flow of air duct in petroleum, chemical industry, gold treatment and power plant, and can realize the control of automatic measurement in the production process.

Online service

Tel：

400 662 6286

1.Overview:

2.Applications:
1.Air tightness and gas detection
2. Power facilities and wind power generation
3. Desulfurization and denitrification , environmental protection
4. Healthcare, food and beverage processing and petroleum chemical
5. Dust removal, light textile, leak detection,etc.

3.Features:

1. Especially suitable for low range, pressure, differential pressure measurement
2. Various interface forms and outlet modes
3. Zero point and range can be continuous adjusted
4. Reverse polarity and current limiting protection
5. Anti-interference
6. Delicate in shape, easy to install
7. Small volume, beautiful appearance and high cost performance
8. High precision, stability and reliability

4.Product installation and pressure drawing mode:

The air differential pressure transmitter is very easy to install. There are M4 screw mounting ports on both sides of the fuselage and thread on the air mouth. The user can choose screw or M10*1.5 nut to fix it.The default pressure interface is 8 pagoda mouth, in which the long mouth is the high-end pressure interface and the short mouth is the low-end pressure interface.(One can also choose 6 pagoda mouth or quick-insert connector)

5.General dimensions:

6.Mainly technical parameters:

Measuring range：	0~100Pa~100KPa（the range can be discussed）
Comprehensive precision：	0.25%FS(code name:A)；0.5%FS （code name:B）；
Output signal：	4-20mA（two-wire code:2）； 0-10V（code:3）；0-5V（three-wire code:4）
Output signal：
Supply voltage：	24(12~36)VDC (amplifying signal)
Operation temperature：	-20~180℃
Compensation temperature：	-10~80℃
Overload pressure：	1.5time of the rated pressure
Response time：	≤1ms（up to 90%FS）
Body material：	Duralumin alloy
Electrical connection：	outlet directly
Pressure connection：	The default pressure interface is 8 pagoda mouth, in which the long mouth is the high-end pressure interface and the short mouth is the low-end pressure interface.(One can also choose 6 pagoda mouth or quick-insert connector)

7.Electrical connection mode:

Zero point and full adjustment Z is zero adjustment S is full adjustment
Air differential pressure transmitter has two types:with the potentiometer and without the potentiometer.If the user chooses with potentiometer port (the user can manually adjust it to zero position
Note:
If no standard pressure source, please do not touch the full potentiometer, which will otherwise affect the accuracy of the transmitter), one can also choose the body without potentiometer port (non-adjustable).

8.Ordering guidance:

Type	Range	Accuracy	Output signal	Screw connector	Electrical connection	Other requirements
MX-YL-07	10KPA	0.25	4-20MA	φ8 pagoda mouth	Outlet directly	---
E g： MX-YL-07-10KPA-A2