中文版中文版MessageContact usSitemapWelcome toShanghai MX-CEKONG Technology Co.,Ltd website!
Hotline 400 662 6286

MX-CEKONG

Tel: 400 662 6286
  • Intelligent Double Flange Differential Pressure Transmitter:MX-YL-188-04
Intelligent Double Flange Differential Pressure Transmitter:MX-YL-188-04
MX-YW-188-04 Remote pressure/differential pressure/level transmitter is used to measure the pressure, level, or density of a liquid, gas, or vapor.The product can be configured HART communication protocol, can communicate with the control system or manual operator, through which the setting, monitoring, testing and configuration.The HART protocol USES the industry-standard BELL202 frequency phase-shift keying (FSK) technology to communicate with a digital signal superposition over a 4-20mA signal without any interference from the frequency signal.


Tel:

400 662 6286

1.Overview:

MX-YW-188-04 Remote pressure/differential pressure/level transmitter is used to measure the pressure, level, or density of a liquid, gas, or vapor.The product can be configured HART communication protocol, can communicate with the control system or manual operator, through which the setting, monitoring, testing and configuration.The HART protocol USES the industry-standard BELL202 frequency phase-shift keying (FSK) technology to communicate with a digital signal superposition over a 4-20mA signal without any interference from the frequency signal.
_PL_0997 0.jpg

2.Application and feathers:

1.Application:
MX - YL - 188-04 pressure/differential pressure, liquid level transmitter, widely used in petroleum, chemical industry, metallurgy, electric power, light industry, food, pharmaceutical, building materials, the scientific research and other enterprises and institutions.
2. Main features:
(1)Small in size and light in weight
(2) Fast response speed and high precision.
(3) Good reliability.
(4) Can be reset directly
(5) Good overload performance
(6)With adjustable damping device
3.Influence of installation position:
 
The change of installation position parallel to the diaphragm will not cause zero drift. If the change of installation position and film surface is more than 90°, zero drift within 0.5KPa can be corrected by zero adjustment without affecting the range.

4.Loading feathers:

Power supply: The power supply is 12 ~ 45VDC or 14.5 ~ 45VDC (add passive isolator, enhance anti-interference), and the general working power supply is 24VDC.
 
 
HART digital signal is superimposed on two-wire (4 ~ 20)mA dc signal, and the user selects linear output or square output.
 
 
JLC6-1
Installation diagram:

5.Size table of the flange:

Flange size Screw hole
Size Outer                      diameter:D Thickness:A B C Number of holes:n Hole-dia:d Distribution of dia:D1
DN25 φ
115
16 49.5 62 4 φ
14
φ
85
DN50 φ
165
20 65 95 8 φ
18
φ
125
DN80 φ
200
20 89 127 8 φ
18
φ
160
 

6.Selection table:

 
Double-flange level transmitter:MX-YL-188-03(with LCD display)                     
10 Output                                
    H 4-20mA with HART Communication                                       
    N 4-20mA output                              
20 Range                                      
      A 0-100Pa~1kPa(0-10~100 mmH2O)/(0-1~10mbar)              
      B 0-200Pa~6kPa(0-20~600 mmH2O)/(0-2~60mbar)              
      C 0-400Pa~40kPa(0-40~4000 mmH2O              
      D the range is directly attach to type-selelction              
30 Material: filling liquid                            
          A Stainless steel:316L Silicon oil                    
          B Ti-diaphragm Silicon oil                    
          C Hi Alloy:C Silicon oil                    
          D Ta-diaphragm Silicon oil                    
40 Working pressure                                  
            A 1MPA                            
            B 1.6MPA                            
            C 25MPA                            
            D 40MPA                            
50 Process connection                            
              A DN25        
              B DN32  
              C DN50  
              D DN80  
60 Sealing material                                  
                N (NBR)                    
                F (FKM)                   
                P (PTFE)                  
70 Other feathers                                    
                  N                          
80 Mounting bracket                                                     
                  N                      
                    1 Stainless               steel                    
                    2 zinc plated carbon steel                  
90 Electrical connection accessories                                
                      N G/2 External thread                     
                      A 1/2 inch NPT Oval flange of stainless steel internal screw    
                      B M20x1.5 External screw with stainless steel        
 

7.Ordering guidance:

Type Output Range Material Process connection Electrical connection
MX-YL-188-04 4-20MA+HART 5M 316L DN50 1/2NPT
E g: MX-YL-188-04-10H-5M-30A-50C-90A

8.Contact us:

Shanghai MX-CEKONG Technology Co.,Ltd

Email: 442365872@QQ.com
 
Tel: 021-67881626
 
Web: www.shmxck.com

Address: No. 488 Guanghua Road, Songjiang District, Shanghai